Follow the steps below to configure a Proxy-Cheap proxy in Dolphin Anty, test it, and launch the browser profile.
Video walkthrough
Important Notes
- The selected proxy type must match the proxy you are using.
For username/password authentication, enter your proxy in the format
username:password@ip:port.- Test the proxy in Dolphin Anty before creating the profile.
- After launching the profile, verify the proxy IP inside the browser.
Setup Steps
Step 1: Create a new browser profile
Open Dolphin Anty and click the + button near the top of the main screen to create a new browser profile.
Step 2: Name the profile and open the proxy settings
Enter a profile name. Under Profile type, select None if you are not targeting a specific platform. Scroll to the Proxy section and click New proxy.
Step 3: Select the correct proxy type
Select the proxy type that matches the protocol shown in your Proxy-Cheap dashboard.
Step 3: Select the correct proxy type
Step 4: Enter the proxy credentials
Enter your proxy in this format:
username:password@ip:portExample:
john_doe:mySecret123@91.124.222.239:49358Make sure there are no extra spaces and that the separators (: and @) are in the correct places.
Step 4: Enter the proxy credentials
Step 5: Test the proxy
Click the refresh/check icon to test the proxy. A successful test should show connection information such as the detected IP or location.
Step 5: Test the proxy
Step 6: Create the profile
After the proxy test succeeds, click Create Profile to save the browser profile.
Step 6: Create the profile
Step 7: Launch the profile and verify the IP
Click Start next to the profile. In the launched browser, open an IP-check website and confirm that the displayed IP is the proxy IP or proxy exit IP.
Step 7: Launch the profile and verify the IP